marți, 23 august 2011

PRODUCED WONDERFUL ARMAFLEX - CARMACELL


Carmacell engineered foams

CHAPTER II

3.HT/ARMAFLEX
Flexible insulation resistance to UV
For heating, industrial and solar temperatures up to 150 º C. It is a flexible elastomeric insulation with exceptional resistance to UV radiation and high temperatures. Closed cell structure based on low thermal conductivity and vapor diffusion prevent and reduce energy losses. It does not contain dust and fiber and is easy to install. Withstand accidental contact with oils. It is used to insulate pipes and fittings serving the solar panels, heat supply pipes, pipe discharge refrigeration units, pipes processing industries.
Gana products: tubes, plates in coils, strip, strips, tubes roleArmaflex Solar Duo.
Technical description: insulation materials with closed cells very flexible, elastomeric-based extruded foam. Applications: pipe insulation, hot gas installations, solar installations.
3.1.HT /ARMAFLEX  S
It is a flexible thermal insulation specifically designed for outdoor applications with high temperatures up to 150 º C. Possesses a closed cell structure that provides a strong barrier against water vapor, reducing the risk of condensation and water infiltration. Low thermal conductivity minimizes energy loss, achieving a higher efficiency equipment. Installation is easy because the insulation HT / Armaflex S is very flexible, without fu need special tools. Protective foil insulation provides extra strength, UV resistance and resistance to weather such as wind, rain, zapada. Armaflex HT Adhesive  625 is used for solder joints correctly. This type of insulation is used for pipelines installation of solar power panels in the interior installation of heating, motor vehicles, gas lines to high temperature steam pipes. Water vapor diffusion resistance μ. Insulation is very flexible, elastomeric foam cells based on aextrudata closed, wrapped in polyethylene.
3.2..ARMAFLEX DUOSOLAR
It is a pre-insulated pipe system and easy to install panels designed to connect professional solar hot water tank, reduce energy losses. Pre-insulated pipes “ Join “ are designed for solar installations and save time on installation. If we can find these study insulation from outside to inside:
1. foil cover that protects against mechanical stress and UV radiation.
2.. Material HT / Armaflex closed with small cell structure reduces energy losses
3. Integrated sensor wire
 4. Tightly coupled system of iron iron
Note: patented adhesive technology “ Join Split” detached and re enable successive accessions.
Low thermal conductivity: λ 0, C = 0.038 W / mx º k
Armaflex DUOSOLAR is a fully integrated solution and consists of supply and return pipes.This allows solar panels to be easily and professionally connected to hot water tanks.


Energy losses are minimal between the solar panel and hot water tank and high efficiency of the entire system. This insulation provides optimum protection against water vapor diffusion due to the closed microcell structure. Black coating protects against mechanical stress and UV radiation. Pre-insulated pipes save time on installation. Supplied in rolls of uncut material that reduces the amount wasted. Average maximum temperature may have fluid in the pipeline will be 150 º C. Many accessories are available for connections. Optional pipe can deliver seamless copper, protected openings.
Application
Armaflex DuoSolar was developed specifically to transport solar energy, in the most efficient way possible in the house circuits. Armaflex DuoSolar can be used in two choice:

3.2.1.Armaflex DuoSolar VA
Flexible corrugated stainless steel pipe pre-insulated with HT / Armaflex and covered with a black sheet of polyolefin copolymer. Increased flexibility allows small radii without leaving the pipe to burst. Coating protects against mechanical stress and UV radiation.

3.2.2.Armaflex DuoSolar CU
Pre-insulated copper pipes with HT / Armaflex and covered with foil of polyolefin copolymer. It is an affordable alternative for smaller installations. It is a good insulation for installation in new buildings. Coating protects against mechanical stress and UV radiation. Armaflex preinsulated DuoSolar innovative solution greatly reduces heat losses of solar panels and hot water tank, ensuring optimization of the entire plant.
. Indications for processing VA DuoSolar Armaflex
Cut the pipe at right angles in a hollow wave. You must obtain a clean edge without burrs. Apply the flexible pipe nuts. Fixing rings are mounted in the first wave of the cutting gap. Double nipple is used to create surface slowly squeezing tight end tube nut.
The new clamping system for safe connection of stainless steel corrugated pipe Armaflex DuoSolar VA
Fits perfectly corrugated stainless steel pipe Armaflex DuoSolar VA. Fast and easy installation without special tools. Safety slip incorporated. Screwless and safe technique.
.Advantages
.The new mounting system was specifically dezolvoltat by mounting Armaflex Armaccel DuoSolar VA. This provides a connection between the pipes and other components of an installation connecting solare. Modern technique, fast and simple integration in solar Armaflex DuoSolar VA. Even if you are assembling and disassembling successive pipe connection remains tight. Hook design is thought to connect pipes in a professional solar installations. Installation is fast with no special tools with a sealing iron on iron.
With simple parts is avoided the possibility of installing wrong.

Un comentariu:

  1. Nice informative blog on thermal insulation products like
    Aluminium Foil Tape
    Vapor Barrier
    Heat insulation etc


    Thermal insulation material is used to insulate pipes and fittings serving so that they can resist heat .

    RăspundețiȘtergere